The current Hauppauge PPA has support for the following tuners: Here is an installation video for Live Channels Note: Click here for the step by step instructions. Tags for this Thread q , hauppage , me tv , mythtv. Please check the Raspberry Pi community on how to install and run an operating system on the Raspberry Pi.

Uploader: Jule
Date Added: 23 August 2007
File Size: 14.5 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 34229
Price: Free* [*Free Regsitration Required]

The firmware is already included nothing else needs to be done to get the HVRQ detected. Join Date Jul Beans 2.

Tags for this Thread qhauppageme tvmythtv. OpenELEC can be downloaded from http: I haven’t figured out what makes the difference. The firmware is already included nothing else needs to be done to get the HVRQ detected.

Looks like it needs some work on the USB removal script somewhere. Raspbian can be downloaded from https: Just out of curiosity, did you have any trouble getting sound? This will dump a raw uyvy video file, which will be playable in VLC but will not be compressed.

I’m still unable to get sound, only video. Here is a video on how to install the drivers and how hauppuage use Kaffeine www.


firmware – How can I install a Hauppauge WinTV HVR card in Ubuntu ? – Ask Ubuntu

Ask Ubuntu works best with JavaScript enabled. Join Date Jun Beans Here is a video on how to install the drivers and how to use Kaffeine. So there is no need to compile your own kernel.

Linux for Colossus 2 Linux support for Colossus 2 is through a user mode application. I have to reboot the computer to get it working again. This should in theory mean that the earth is still connected but the power cannot come on.

1. Physically install the card

Let’s get the package from a Launchpad archive, and pull out the dvb-fe-tda Download the linux-firmware-nonfree package The linux-firmware-nonfree package is not in the repositories anymore, I’m not really sure why but I read something suggesting it might be incompatible with newer kernel versions. Click here for Linux kernel 3. If you are using a video monitor which does not support AC3 surround sound audio, you can use a sound bar which normally have AC3 decoders built in.

It took me a little bit of messing around to finally figure this out, so I’ll share the command that worked for me with the HVR Hauopauge saa is in use.

  ECS 945GCT-M 1333 V3.0 LAN DRIVER

Ubuntu kernel + LinuxTV media tree + Hauppauge patches : Brad Love

Post as a guest Name. Firstly, TVTime was really helpful for viewing the analogue input to the tuner, so install that with:. I’m just seconding the issue in hopes that someone will jump in here.

Test the saa driver The saa driver should be automatically loaded, you can check this with: That mixer does NOT work since I don’t have one. Please see our PPA page. hauppaugge

Support: Running WinTV TV tuners and HD PVR 2 under Linux

You will also need the firmware which is not included with Raspbian Jessie. Click here for our Ubuntu installation video. After you install Plex please run the following command in terminal to provide the appropriate tuner permission to Plex sudo usermod -a -G video plex.

July 18th, 3. Download the correct package for your model below.