To enable proper queuing for voice and call control traffic use the following guidelines. Locked Profiles Individual profiles can also be locked, which does not allow the user to modify those settings. The utility does allow PEAP to be configured, but without the server validation option. It is recommended to either disable the session timeout or extend the timeout e. If 5 GHz is also used for data, video or other applications, then is suggested to keep the higher data rates enabled e.

Uploader: Daitilar
Date Added: 16 January 2011
File Size: 65.38 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 53248
Price: Free* [*Free Regsitration Required]

Recommended to set the minimum data rate to 11 Mbps or 12 Mbps for 2. There are only 3 non-overlapping channels in the 2. Select Device List, then press Scan, which will then list the available devices. Browse to the TAR file and then click Upload.

Full web access must be enabled in Cisco Unified Communications Manager in order to make changes. Networking by Shara Tibken Oct 22, This is more important if planning to deploy 2. The DTIM period is a tradeoff between battery life and multicast performance. unifide

For Cisco Unified access points, can manually select a UNII-1 channel channels 36, 40, 44, 48 for the desired access points. Disallowing packets to be transmitted at lower rates preserves capacity.


Call Capacity Design the network to accommodate the desired call capacity. Enabled Signature Policy Signature Processing The parameters queue delay, media delay, packet loss, packet count, roaming delay, roaming count will be gathered by the AP and escalated to the WLAN management system, which will help maintain a database that can be used for the benefit of the stations by ensuring low packet latency and loss. Press the End button on the phone to return to the main screen.

Out of Range Alert An out of range alert can be configured to beep once or periodically to audibly notify the user that they have traveled out of the coverage area. For optimal battery life and performance, we recommend setting the DTIM period to unifjed with a beacon period of ms. In this mode, firmware upgrades via the web interface are not allowed. Press the Yes softkey to confirm or Direless to cancel.

The phone resets after selecting Yes. Video Games by Lori Grunin 10 days ago.

Cisco Unified Wireless IP Phone 7925G – wireless VoIP phone Series

This determines how long the button must be pressed and held to activate. The MOS value should be greater than or equal to cksco.

Configure hnified access point transmit power level assignment method for either 5 or 2. The phone briefly displays Restore to Default? Limited support is provided when using 3rd party access points as there are no interoperability tests performed for 3rd party access points.


If the prompt is dismissed, then there is a Login softkey presented in order to invoke the login process. Enable individual phone configuration files with the following commands.

Zone 0 and 20 require Category 1 marked equipment, zone 1 and 21 required Category 2 marked equipment and zone 2 and 22 required Umified 3 marked equipment. The channels enabled for scanning can also be managed in the Advanced Network Profile settings. Cisco AP Series Recommended to set 12 Mbps as the mandatory basic rate and or Mbps as supported optional rates; however some environments may require 6 Mbps to be enabled as a mandatory basic.

Cisco Unified Wireless IP Phone g USB Cable | eBay

Use comma to separate multiple commands. File System Verification This parameter indicates whether the phone will perform a file system integrity check as part of the firmware upgrade process. Using an overlapping channel set such as 1, 5, 9, 13 is not a supported configuration. Avoid mounting access points on these surfaces.